TransPulse Synergic 2700

TransPuls Synergic 2700

TPS2700.pdf

The TransPuls Synergic 2700 for short circuit, spray and pulsed arcs is a fully digitised and microprocessor-controlled MIG/MAG power source with an output of 270 A. The power source gives the best weld properties in every respect, and reproducible results time and time again. The integral wire-feed unit guarantees portable use on construction sites, in workshops and for maintenance and repair activities. The multiprocess power source is suitable for MIG/MAG, TIG and electrode welding.

Categories: , , ,

Product Description

Technical Information

TransPulse Synergic 2700
Mains voltage 3 x 400V
Mains fuse slow 16A
Primary continuous current (100 %) 15A
Cos phi 0,99 (270A)
Degree of efficiency 87% (210A)
Welding current range MIG 3 – 270A
Welding current range, MMA 10 – 240A
Welding current at
10 min/40C 40% d.c. 270 A
10 min/40C 100% d.c. 170 A
Open-circuit voltage 50V (15V VRD)
Operating voltage MIG 14.2 – 27.5V
Operating voltage MMA 10.1 – 20.8V
Protection IP 23
Type of cooling AF
Insulation class B
Dimensions l/w/h mm 625x290x475
Dimensions l/w/h (inches) 24.63×11.43×18.72
Weight 27kg
Weight lb 59.4

Reviews

There are no reviews yet.

Be the first to review “TransPuls Synergic 2700”

Your email address will not be published. Required fields are marked *